200A,15kV Fused Load break Elbow Connector 101126-1

Typical Arangement: 1.Fused Elbow Connector+Potential Transformer; 2.Fused Elbow Connector+200A Bushing Well+200A Bushing Insert

The CEE ZTR-15/200 Fused Loadbreak Elbow connector combines a general purpose,

current-limiting fuse in a deadfront,submersible 200 Amp loadbreak eblow housing. Fuse

replacement is easily accomplished by disconnecting the elbow from the source,unscrewing

the probe and pulling apart the housing to expose the fuse.

The Fused Loadbreak Elbow connector is a fully-shielded and insulated plug-in termination,

rated 200 amps,15kV, connected with underground cable ranging from 25 to 120 mm2

(conductor cross section).

The CEE ZTR-15/200 Fused Loadbreak Elbows are molded using high quality peroxide-

cured EPDM insulation. It is used to connect underground cable to potential transformers,

switchgear.The two test points are a  vailable for using with hot line voltage indicators to determine fuse status and blown fuse indication.

200A,15kV Fused Load break Elbow Connector 101126-1